Ghost Immobiliser Fitting
Protect your vehicle from theft of keys hacking, cloning, and theft with the world's first aftermarket immobiliser for CAN. With the option to connect to a Ghost app and GPS tracking system that will send you alerts to call in the event that your vehicle is damaged with or stolen.
The installation of a Ghost immobiliser can be done by a certified technician. It is essential to have the appropriate equipment and heat shrink tubing.
Getting Started
Ghost immobilisers are an excellent alternative to physical theft protection devices like wheel locks and car alarms. They guard your vehicle without the use of LED indicators or key fobs. Instead, they connect directly to the ECU's CAN network and can only be activated after entering a PIN sequence. This provides a much more secure level of protection from key hacking, cloning and even ECU swapping.
As a result, installing a ghost immobiliser Birmingham has to be done with extreme speed and accuracy. It's like navigating a minefield; one misstep could cause severe damage to the circuits of the electrical system of your vehicle. To avoid this, it's essential to be aware of the procedure for installing and prepare your vehicle accordingly.
First, you need to prepare the vehicle by removing the interior panels to make room for the immobiliser device. Once you've located the perfect place to conceal it and secure it by using cable ties to stop it from being removed or tampered with. Clean up your wiring by tying loose wires down and using insulation tape to cover any exposed connections. This reduces the risk of a short circuit that is not intended to happen, while improving the aesthetics and reducing the chance of theft.
Find ghost vehicle immobiliser of 12V power, as well as a grounding source for the ghost immobiliser. Once you have found them check the power cables using a multimeter. Connect the CAN H & CAN L wires of the immobiliser to the power source and grounding points.
Once you've made all of the necessary connections It's crucial to double-check the connections and check the immobiliser for signs of corrosion or damage. Also, test the system to make sure it's working correctly by entering a PIN number and then starting the engine. This should be a regular part of your routine, because it will allow you to spot any intermittent issues early. Regular testing can help increase the longevity of your device and keep it performing at its best.
Preparing the Vehicle
Installing a Ghost immobiliser is a process that requires expertise and tools. A wiring diagram is necessary to identify the right wires, making accurate connections and ensuring security. A multimeter can be used to check the electrical properties and ensure security. Insulation tape and cable tie can be used to secure the connections and shield them from tampering. A user's manual is provided for your Ghost Immobiliser. It will give you specific instructions specifically tailored to the model.
Once installed the ghost immobiliser will stop unauthorised engine starts by requiring the driver to enter a unique PIN sequence through existing buttons in the steering wheel or center console. This can be accomplished manually or remotely using a mobile phone app, and the code can easily be altered by the owner of the vehicle at any time. The device is also quiet and is undetectable by thieves as it does not emit radio frequencies.
Ghost immobilisers connect directly to the vehicle's CAN bus, which is a network that connects to all of the electronic control units (ECUs). It intercepts signals from the ECUs and prevents the engine from starting if a false signal is detected. The system is tamperproof and weatherproof, but it does not have key fobs or LED indicators to attract the attention of thieves.
It can be placed behind or in a less noticeable area to ensure that it isn't easily spotted by thieves and won't hinder vehicle performance. It can be tucked away in a small container so that it is less likely to be observed by untrustworthy salespeople during a test drive.
Its low-profile operation and integration with the vehicle's CAN bus system make it a powerful deterrent to modern methods of theft, like key cloning and signal relay attacks. Combining the system with other security measures will create an effective barrier to frustrate even the most persistent thieves. This is why more insurance companies are now suggesting or even requiring ghost immobilisers be fitted, as they can drastically reduce the cost of insurance.
Making Connections
Ghost immobilisers are quiet unlike traditional security systems, which can be heard by thieves. They stop thieves from knowing that your car is running. They also prevent high-tech methods of theft, such as OBD hacking. They can also be fitted without causing permanent damage to your car which makes them a great option for those who are planning to sell their car in the near future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and current solutions to stop car theft. It makes use of the CAN data network to deactivate your engine and generates a pin code that only you know, meaning it is difficult for thieves to detect. It can be installed in various vehicles and works with many existing features, including car alarms, GPS trackers, steering wheel locks, and door lock bypass systems.
If you decide to opt for an Ghost immobiliser, be sure to check the wiring diagram of your specific vehicle model to identify the wires that need connecting. Verify the location of these wires to ensure accuracy and mark them with labels or tape to aid in keeping track of them. You'll also need to locate a reliable power source (12V) for the system, as well as an earthing. Once you have these in place, you can start to connect the components to complete the installation.
If the ghost immobiliser is connected to your CAN bus, it will stop your vehicle from starting unless you enter a pin number using the buttons on the dashboard or steering wheel. This will stop ECU cloning and other methods of vehicle theft. In addition, it can be combined with other Thatcham-approved security accessories, such as alarms and tyre clamps to give your vehicle an even greater level of protection.
As the UK automotive industry continues to expand, so do the options available for securing your vehicle. There are so many ways for thieves to get into your car and take it, so it's important to do everything you can to ensure that it isn't taken away. Ghost immobilisers are an increasingly popular option for car owners who are accountable.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from starting until a specific PIN code is entered. This makes it extremely difficult for thieves to steal the key fob that you use to start your vehicle, and harder to disable the system by hacking its electronic.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help you locate your vehicle in the event that it is stolen. This is a feature that isn't often available in aftermarket security products, but it is an excellent way to improve your vehicle's security, and give you peace of mind.
The Ghost-II immobiliser not only provides greater security, but also provides a more convenient experience for the user by getting rid of the need for additional key fobs or devices. It has a simple, user-friendly PIN code entry that integrates seamlessly with your daily routine. Additionally, it provides options for deactivation and features that let you temporarily disable the immobiliser to allow valet parking or servicing.
Prepare the necessary tools and become familiar with the wiring of your vehicle. A basic set of hand tools will allow you the flexibility to make precise connections and a multimeter is a great tool to verify electrical values. Insulation tape and heat-shrink tubing is essential to protect connections from short circuits. Cable ties can also be used to secure wiring. It is also essential to work in an area that is well-lit, and wear safety equipment when working with electrical equipment and components.
After you've completed the installation, you must test the Ghost immobiliser to verify that it's functioning properly. You should first try to start the vehicle without entering the PIN. If this fails, you'll need to retest the system and conduct a more thorough inspection of the connections.
In contrast to other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is more effective than traditional deterrents, such as wheel clamps or steering locks. It is TASSA-approved and recognized by a few insurance companies. This makes it a cost-effective investment that will give you the peace of mind you deserve.